2000W Ultrasonic Welder
2.Lead time:About 20 days
3.Payment term:L/C,D/A D/P,T/T,Crecit card,Western Union
4.Application:For battery multilayer Cu/Al Foil and Al/Ni tab welding
5.MOQ:1 Set
2000W Ultrasonic Welder For Battery Multilayer Cu/Al Foil and Al/Ni tab Welding
2000W Ultrasonic Welding Machine suitable for welding 0.1mm nickel tab to copper foil upto 20 layers. welding 0.1mm alumunum tab to aluminum foil upto 20 layers.
Drived by air compressor.gas supply less than 0.5Mpa is ok.
|
|
|
|
|
|
|
|
|
|
|
TOB-USW-2000W |
2000W |
24KHZ |
220V/ 50Hz
|
Greater than or equal to 0.5MPa |
|
20 mm |
0.05-9S |
1. Ceramic chip Black film imported from Germany 2.aluminum bar Alcoa 3. Welding head High speed steel |
|
|
① 0.1mmaluminum strip+luminum foil within 20 layers,Solder joints 3*3mm,3*4mm,3*8mm,4*6mm,4*10mm. customized |
|||||||
| ② 0.1mm nickel strip+copper foil within 20 layers,solder jionts 3*3mm,3*4mm,3*8mm,4*6mm,4*10mm. customized | ||||||||
| ③ Aluminium-nickel composite strip welded to aluminum cover plate or aluminum shell bottom double point;solder joints 3*3mm,two groups 10mm long,3*4mm two groups14mm lomg,each group 6 small point,9 mall point ect. | ||||||||
2.Control interface and welding sample
Red box shows real-time frequency, real-time power, peak-time power, set power, time mode, energy mode
The interface is a quality control interface, setting the time range, minimum 0.01S, maximum 9.99S.
The energy range is set according to the real-time welding energy setting interval, and the device will give an alarm when the welding process is out of range.
The power range is set according to the real-time welding power setting interval, and the device will give an alarm when the welding process is out of range.
The interface is a power setting interface, setting the welding amplitude, ranging from 10% to 99%
ISO 9001
Popularni tagovi: 2000w ultrasonic welder, suppliers, manufacturers, factory, price
Moglo bi vam se i svidjeti
Pošaljite upit